Bowden cable, left

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Release union nut (1).

Fig 1: Identifying Union Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Tightening torque 34 41 5AZ . See 34 41 PARKING BRAKE .

Pull Bowden cable (1) out of actuating unit (2).

Fig 2: Identifying Bowden Cable And Actuating Unit

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Make sure all parts are absolutely clean.

Turn spindle (1) out of actuating unit (2) and remove Bowden cable.

Installation:

Lubricate new spindle with grease provided.

Insert spindle (1) 3 turns into inner spline shaft of actuating unit (2).

Fig 3: Removing Bowden Cable

Courtesy of BMW OF NORTH AMERICA, INC.