Adjustment at linkage

WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

To lengthen linkage, turn turnbuckle (1) max. 180° in counterclockwise direction.

To shorten linkage, turn turnbuckle (1) max. 180° in clockwise direction.

Engage turnbuckle (1) on adjusting lever in direction of arrow.

IMPORTANT: Check ease of movement between turnbuckle (1) and pin of adjusting lever (ensure rectangularity).

Check turnability at wastegate valve again.

Fig 1: Identifying Turnbuckle

Courtesy of BMW OF NORTH AMERICA, INC.

Secure lock nut (1); to do so, secure turnbuckle against turning with a suitable tool.

Tightening torque 11 65 10AZ , see SUPERCHARGER

Mount locking clip (2).

Fig 2: Identifying Lock Nut And Locking Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Observe diagnosis instructions.

Execute test module for boost pressure control.