LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2276 (Engine - Repair (N54)) >> Intake Manifold >> 11 61 730 BMW leak test for intake system (N54) >> Vacuum pressure measurement

Vacuum pressure measurement

WARNING: This page is about a different car, the 2010 BMW X6, 2009 BMW X6, and 2008 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Prepare diagnosis tester on diagnosis unit.

  1. Screw in pressure sensor.
  2. Connect stimuli cables (2) to positive and negative.
  3. Connect 12V battery cables (3) to vehicle battery positive and negative.
  4. Controller for vacuum connection.
  5. Vacuum connection (Red).
Fig 1: Identifying Stimuli Cables And 12V Battery Cables
G05501862Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals