65 13 188 Removing and installing/replacing rear mid-range speaker (in rear shelf)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 340

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Lever speaker cover (1) with special tool 00 9 340 out of rear shelf (2).

Fig 1: Identifying Rear Shelf And Lever Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lugs (1) and locks (2) of speaker cover (3) must not be damaged.

Fig 2: Identifying Lugs, Locks And Speaker Cover

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove mid-range speaker (2) upwards from rear shelf (3).

Disconnect associated plug connections and remove mid-range speaker (2).

Fig 3: Identifying Mid-Range Speaker And Rear Shelf

Courtesy of BMW OF NORTH AMERICA, INC.