65 24 020 Removing and installing/replacing blocking circuit (left or right)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Move lowerable hardtop into position shown.

Fig 1: Move Lowerable Hardtop Into Position Shown

Courtesy of BMW OF NORTH AMERICA, INC.

Release screw (1) and disconnect plug connections (2).

Fig 2: Release Screw (1) And Disconnect Plug Connections (2)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: Fit blocking circuit (1) so that screw (2) engages thread (3) and locating pin (4) engages bore (5).

Fig 3: Fit Blocking Circuit (1) So Screw (2) Engages Thread (3) And Locating Pin (4) Engages Bore (5)

Courtesy of BMW OF NORTH AMERICA, INC.