65 77 541 Removing and installing/replacing front left or right acceleration sensor (Convertible)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Acceleration sensor only fitted in US version!

Necessary preliminary tasks:

Remove front wheel arch trim. .

Disconnect plug connection (1). Release screws (2) and remove sensor (3).

Fig 1: Identifying Plug Connection, Screws And Sensor

Installation: Replace screws. Tightening torque 65 77 9AZ, see 65 77 AIRBAG TRIGGERING CONTROL .