52 13 198 Removing and installing/replacing rear panel on left or right front seat backrest

WARNING: This page is about a different car, the 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Release clips (1) with diagonal cutting pliers.

Remove rear panel (2) downwards with a turning action.

NOTE: Remove remnants of clips.

Fig 1: Removing Rear Panel Downwards

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Retaining hooks (1) and bore holes (2) on rear panel (3) must not be damaged.

Replace faulty clips.

Fig 2: Identifying Rear Panel Hooks

Courtesy of BMW OF NORTH AMERICA, INC.