51 24 131 Removing and installing/replacing left or right striker for rear lid lock

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove trim on support tube

Release screws (1).

Remove shims (2) and striker (3).

Tightening torque 51 24 4AZ, see 51 24 REAR LID LOCKS .

Installation:

Adjust striker .

Fig 1: Checking Alignment Of Rear Lid And Striker

Courtesy of BMW OF NORTH AMERICA, INC.