51 16 260 Removing and installing/replacing front section of rear console trim: Notes
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317
See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .
Apply special tool 00 9 317 at side and unclip trim (1) in upward direction from retaining clips (2).
If necessary, disconnect plug connections and remove trim (1).
Installation:
Clips (2) must not be damaged.