51 45 263 Removing and installing/replacing instrument panel trim on right

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 321

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Carefully release trim (1) with special tool 00 9 321 from retainers (3) and lock pins (2).

Fig 1: Identifying Trim, Retainers And Lock Pins

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (Hutfix) (1) must be seated in associated mountings.

Replace clips (Hutfix) (1) if they were released during removal.

A Turn clip (Hutfix) (1) with screwdriver to left by approx. 90°
B Lever out clip (Hutfix) (1) from below

Fig 2: Identifying Clip (Hutfix)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lock pins (1) and retainers (3) on trim (2) must not be damaged.

If necessary, replace lock pins (1) and retainers (3).

Fig 3: Identifying Pins, Retainers And Trim

Courtesy of BMW OF NORTH AMERICA, INC.