Right tension strut
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Remove left tension strut.
Release screws (1, 3) and remove right tension strut (2).
Installation:
Make sure screws are installed in correct positions.
- Screw (1) M12x35
Tightening torque 51 71 21AZ, see 51 71 SEALS AND LOOSE BODY PARTS .
- Screw (3) M10x25
Tightening torque 51 71 20AZ, see 51 71 SEALS AND LOOSE BODY PARTS .