Left tension strut

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Release bolts (1, 3, 4, 5) and remove left tension strut (2).

Installation:

Replace screw (3).

Make sure screws are installed in correct positions.

Screw (1) M12x35
Tightening torque 51 71 21AZ, see 51 71 SEALS AND LOOSE BODY PARTS .

Fig 1: Identifying Left Tension Strut And Bolts
Courtesy of BMW OF NORTH AMERICA, INC.
Screw (3) M12x50
Tightening torque 51 71 22AZ, see 51 71 SEALS AND LOOSE BODY PARTS .
Screw (4) M10x25
Tightening torque 51 71 23AZ, see 51 71 SEALS AND LOOSE BODY PARTS .
Screw (5) M10x25
Tightening torque 51 71 20AZ, see 51 71 SEALS AND LOOSE BODY PARTS .