51 71 380 Removing and installing / replacing vibration damper: Replacement

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Release nuts (1) and remove vibration absorber (2) from battery carrier (3).

Tightening torque 51 71 15AZ, see 51 71 SEALS AND LOOSE BODY PARTS .

Fig 1: Identifying Vibration Absorber From Battery Carrier And Nuts

Courtesy of BMW OF NORTH AMERICA, INC.