51 71 ... Removing and installing/replacing right spring support passage cover

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

If necessary, remove right front wheel.

NOTE: Description is shown on the E82 by way of example. There may be differences in detail in the case of other models.

NOTE: Spring strut removed for purposes of clarity.
Release expander rivet (1) and remove cover (2).

Installation:

If necessary, replace expander rivet (1).

Note correct position of cover (2).

Fig 1: Identifying Expander Rivet And Cover

Courtesy of BMW OF NORTH AMERICA, INC.