51 32 420 Removing and installing/replacing trim on front door window frame, left or right

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

E83 only:

Remove window cavity cover strip on outside of front door

Partially detach rubber window seal (1) at rear.

Fig 1: Identifying Rubber Window Seal

G04767890

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove finisher (2) and press approx. 3 mm towards rear.

Fig 2: Identifying Screws And Finisher

G04767891

Courtesy of BMW OF NORTH AMERICA, INC.

Remove trim (1) towards top.

Fig 3: Identifying Trim

G04767892

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Following parts must not be damaged or missing:

Plastic nuts
Sound insulation
Seal

Fig 4: Identifying Plastic Nuts, Sound Insulation And Seal

G04788690

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Check trim (1) for damage, replace if necessary.

Fig 5: Identifying Trim

G04788691

Courtesy of BMW OF NORTH AMERICA, INC.