41 11 141 Cover For Left Or Right Frame Side Member Replacement (Partial Replacement Between A-And B-Pillars)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.
Use only approved spot-welding apparatus for repairs.
Following new body parts are required:
Mark severance cuts (1) in accordance with specified measurements and cut.
Measurement a = approx. 85 mm behind A-pillar
Measurement b = approx. 35 mm before side panel at rear
Open weld joints in areas (2).
Installation:
Weld reinforcement plate s at all severance cuts (1).
Apply window glass adhesive to cavity acoustic baffle (3).