41 35 401 Rear Left Side Panel Replacement (Partial Replacement, Door Opening)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Use only approved spot-welding apparatus for repairs.
Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.
- (1) Side panel, rear
Mark severance cuts in accordance with specified measurements and cut.
IMPORTANT:
Cut outer metal sheet only.
Measurement a = approx. 90 mm from middle of lower lock striker screw point
Measurement b = approx. 375 mm from centrepoint of 25 mm dia. hole
Open weld joints in areas (1).
Installation information:
- Apply window glass adhesive to cavity acoustic baffles (2).
- Weld in reinforcing panels at all severance cuts.