41 62 014 Rear Lid Adjustment

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

The BODY GAP DIMENSIONS serve as the basis for adjustment work.

Make unpainted surfaces visible by also moving the hinges.

Touch these up in the appropriate color.

Slacken screws (1) and (2) on rear lid hinge to rear lid until such stage that rear lid can still be moved.

Adjust rear lid.

Retighten all screws.

Tightening torque 41 62 1AZ , see 62 REAR LID .

Fig 1: Slacken Screws (1) And (2) On Rear Lid Hinge

Courtesy of BMW OF NORTH AMERICA, INC.

Adjusting height of rear lid in relation to side panel:

Slacken screws (1) on rear lid hinge to side panel until such stage that rear lid can still be moved.

Adjust rear lid.

Retighten all screws.

Tightening torque 41 62 3AZ , see 62 REAR LID .

Adjust rear lid lock .

Fig 2: Slacken Screws (1) On Rear Lid Hinge To Side Panel

Courtesy of BMW OF NORTH AMERICA, INC.