41 31 010 Outer Roof Skin Replacement (Version With Slide/Tilt Sunroof)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Use only approved spot-welding apparatus for repairs.

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

(1) Roof outer skin, slide/tilt sunroof

Fig 1: Outer Roof Skin, Slide/Tilt Sunroof

Courtesy of BMW OF NORTH AMERICA, INC.

Release 4 screws (1) in roof channel.

Fig 2: Screws In Roof Channel

Courtesy of BMW OF NORTH AMERICA, INC.

Fig 3: Weld Joint Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Open weld joints in area (1).

Release adhesive areas (layout, see next operation) and remove roof outer skin.

Installation:

Fit new part on body. Fit windscreen for positioning.

Seal weld seams and screws with sealing compound.

Fig 4: Sealing Compound Area And Adhesive Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Apply adhesive in areas (1).

Apply sealing compound in areas (2).