34 41 ... Removing and installing or replacing gaiter for handbrake lever
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 00 9 317
See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS -- 128I .
Unclip gaiter with special tool 00 9 317 .
Pull gaiter (1) over handbrake lever.
Cut cable ties (2) and remove gaiter.
Installation:
Eye of cable tie must face downward