34 33 075 Removing and installing/replacing vacuum pump (S65)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Read and comply with General Information .
Remove front left wheel

IMPORTANT: Before starting work, press the brake pedal to the floor several times to reduce the vacuum pressure in the brake booster. This makes it easier to detach the lines.

Release screws (1).

Press wheel arch cover (2) forwards slightly in direction of arrow.

Fig 1: Identifying Wheel Arch Cover And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock quick-release fastener (2) and detach vacuum hose.

Disconnect plug connection (4).

Release nut (3) and pull vacuum pump (1) upwards out of bracket.

Fig 2: Identifying Plug Connection, Quick-Release Fastener, Nut And Vacuum Pump

Courtesy of BMW OF NORTH AMERICA, INC.