31 10 010 Removing and installing/replacing reinforcement plate (M3)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Observe safety instructions
for raising the vehicle
Driving without reinforcement plate is not permitted!
Driving without reinforcement plate is not permitted!
Necessary preliminary tasks:
- Remove front underbody protection . See 51 47 490 REMOVING AND INSTALLING / REPLACING FRONT UNDERBODY PROTECTION .
Release screws (1).
Release screws (2) and remove reinforcement plate (3).
Installation:
Replace screws (2).
Tightening torque, see 31 10 FRONT AXLE SUSPENSION .