23 00 ... Replacing speed sensor (transmission main shaft) (GS6S53BZ) (S85/S65)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove underbody protection. See 51 47 490 REMOVING AND INSTALLING / REPLACING FRONT UNDERBODY PROTECTION .
- Remove right heat shields.
Recycling:
Catch and dispose of gear oil with suitable equipment.
Observe country-specific waste-disposal regulations.
Unlock plug (1) and remove.
Release screw (2).
Remove speed sensor.