22 32 050 Replacing cross-member for transmission mounting (S65)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear underbody protection . See 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION .
Support transmission with hydraulic jack.
Release screws (1).
Tightening torque: 22 32 4AZ , see 22 32 TRANSMISSION MOUNTS .
Unscrew nuts (2).
Tightening torque: 22 32 3AZ , see 22 32 TRANSMISSION MOUNTS .
Remove cross-member.