22 31 001 Replacing rubber mount for transmission mounting

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove rear underbody protection. See 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION .
Support transmission with lifter.

Remove screws and nuts.

Remove transmission cross-member (1).

Remove rubber mount from transmission cross-member.

Tightening torque 22 32 3AZ/4AZ , see 22 32 TRANSMISSION MOUNTS .

Fig 1: Identifying Transmission Cross-Member

Courtesy of BMW OF NORTH AMERICA, INC.

Necessary preliminary tasks:

Remove rear underbody protection. See 51 47 491 REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION .
Support transmission with lifter.

Remove screws and nuts.

Remove transmission cross-member (1).

Remove rubber mount from transmission cross-member.

Tightening torque 22 32 3AZ/4AZ , see 22 32 TRANSMISSION MOUNTS .

Fig 1: Identifying Screws And Nuts With Transmission Cross-Member

Courtesy of BMW OF NORTH AMERICA, INC.