16 12 010 Removing and installing/replacing carbon canister (DMTL)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove cover for carbon canister . See 51 71 ... REMOVING AND INSTALLING/REPLACING COVER FOR CARBON CANISTER .

Disconnect plug connection (1).

Unlock quick-release fasteners (2) and disconnect vent lines.

Release screws (3) and remove carbon canister (4).

Installation:

Tightening torque 16 13 1AZ . See 16 13 TANK VENTILATION .

Fig 1: Identifying Plug Connection And Carbon Canister With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Lug (1) must be correctly seated in guide (2).

Fig 2: Identifying Guide And Lug

Courtesy of BMW OF NORTH AMERICA, INC.