16 13 015 Removing and installing/replacing tank leak diagnosis module (petrol/gasoline cars with US DMTL version)
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove carbon canister
Release screws (1).
Disconnect tank leak diagnosis module (2) from carbon canister in direction of arrow.
Installation:
Tightening torque 16 13 2AZ . See 16 13 TANK VENTILATION .
Replace sealing ring.