61 31 996 Carrying out steering angle sensor adjustment
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
In vehicles with active front steering, steering angle sensor adjustment is integrated in the service function "Initial operation/adjustment for active front steering"
and must not be carried out separately!. See 61 31 996 CARRYING OUT STEERING ANGLE SENSOR ADJUSTMENT
.
NOTE:
Steering angle sensor adjustment must be carried out:
- after adjustment work on the front axle/steering
- after all mechanical work on the steering system
- E46 (AWD), E53, E83: after disconnection of battery
- after replacement / coding / programming of the following components:
- Fixture for switches of steering column / switch cluster / steering angle sensor
- Dynamic Stability Control (DSC) control unit
- Control unit active anti-roll stabilization (ARS)
Connect vehicle to BMW diagnosis system or Software Service Station.
Select and carry out steering angle sensor adjustment under Service functions.