61 31 204 Replacing switch combination for seat adjustment
WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove outer cover on front seat. See SEATS - REPAIR (CONVERTIBLE/COUPE) or SEATS - REPAIR (SEDAN) .
Unlock retaining tabs (3) in direction of arrow and remove switch combination (1) from cover.
Disconnect plug connection (2).
Installation:
Retaining tabs (3) of cover and guide (4) of switch combination (1) must not be damaged.
Make sure switch combination (1) is correctly seated in retaining tabs (3).