61 31 192 Replacing knob for controller

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 317

NOTE:

See MAINTENANCE AND GENERAL INFORMATION - SPECIAL TOOLS .

Partially fit special tool 00 9 317 as illustrated.

Lever out knob for controller (1) from controller (2) and remove towards top.

Fig 1: Removing Knob For Controller

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Risk of damage!
Install knob for controller only when controller is installed.

Installation:

Fit knob for controller (1) so that guides (2) are correctly seated in mountings (3).

Fig 2: Identifying Controller, Guides And Mountings

Courtesy of BMW OF NORTH AMERICA, INC.