61 31 083 Removing and installing/replacing switch for unlocking rear lid

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: To facilitate handling, unclip OBD socket cover (1).

Unclip rear lid unlocking switch (2) in direction of arrow.

Disconnect associated plug connection and remove switch for unlocking rear lid (2).

Fig 1: Uncliping Rear Lid Unlocking Switch

Courtesy of BMW OF NORTH AMERICA, INC.