LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2241 (General Electrical System - Repair - E92/93) >> Plug Connection, Terminals >> 61 13... Opening plug housings and removing contacts of different plug systems >> 61 13... In-line plugs, 6- to 50-pin

61 13... In-line plugs, 6- to 50-pin

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Unlock lock.

Fig 1: Unlocking Lock
G05478489Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten cable clip.

Installation: 

Cable clip must be reinstalled.

Fig 2: Locating Cable Clip
G05478490Courtesy of BMW OF NORTH AMERICA, INC.

Detach catch (1) from plug housing (2).

Fig 3: Detaching Catch From Plug Housing
G05478491Courtesy of BMW OF NORTH AMERICA, INC.

Press out contact carrier (3) with wiring harness (4) through opening (5).

Fig 4: Pressing Contact Carrier With Wiring Harness
G05478492Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook (6) of defective contact and pull cable and contact up to secondary lock (8).

Fig 5: Identifying Arrester Hook And Secondary Lock
G05478493Courtesy of BMW OF NORTH AMERICA, INC.

Hold down arrester hook once again in secondary lock (8) and pull cable and contact completely out of contact carrier.

Fig 6: Holding Arrester Hook In Secondary Lock
G05478494Courtesy of BMW OF NORTH AMERICA, INC.