61 13... Cutting off, stripping insulation and cutting optical fibres to length: Notes

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

61 4 320

NOTE:

See GENERAL ELECTRICAL SYSTEM - SPECIAL TOOLS .

To cut off, strip insulation and cut optical fibres to length, use pliers 61 4 321 (1) in conjunction with crimping

head 61 4 322 (2) from crimping set 61 4 320 .

NOTE: Pliers (1) open automatically as far as they will go when handles are pressed together.

Fig 1: Identifying Crimping Head And Pliers

Courtesy of BMW OF NORTH AMERICA, INC.