61 35 115 Removing and installing/replacing footwell module

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD protection) .

Necessary preliminary tasks:

Remove footwell side trim panel on A-pillar, left . See 41 35 010 REMOVING AND INSTALLING/REPLACING SIDE PANEL, FRONT LEFT OR RIGHT .

Disconnect plug connection (1).

Release nuts (2) and remove footwell module (3).

Fig 1: Identifying Plug Connection, Nuts And Footwell Module

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out vehicle programming/coding.