61 35 080 Removing and installing (replacing) control unit for left or right seat adjustment (front seat)

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection) .

NOTE: To facilitate installation/removal of control unit, move seat upwards fully.

Unlock metal lug (1) towards front and remove control unit for seat adjustment (2) towards bottom.

Unlock and disconnect all associated plug connections.

Fig 1: Unlocking Metal Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure control unit for seat adjustment (1) is correctly seated in mounting (2).

Guides (3) and metal lug (4) must not be damaged.

Fig 2: Identifying Seat Adjustment, Mounting, Guides And Metal Lug

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement:

Carry out programming/coding.