LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2241 (General Electrical System - Repair - E92/93) >> Auxiliary Cable >> 61 12 013 Replacing battery negative lead

61 12 013 Replacing battery negative lead

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe safety instructions   for handling vehicle battery.
Notes and instructions on Intelligent Battery Sensor IBS. 

Necessary preliminary tasks: 

Disconnect plug connection (1).

Slacken nut (2) on battery negative terminal.

Tightening torque, see 61 21 1AZ  in 61 21 BATTERY WITH TERMINAL .

IMPORTANT: Do not under any circumstances use force to pull off pole shoe.
Do not under any circumstances release socket-head cap screw of IBS.
Fig 1: Identifying Plug Connection, Battery Negative Lead And Nuts
G04727443Courtesy of BMW OF NORTH AMERICA, INC.

Detach battery negative lead (3) with intelligent battery sensor (IBS) in upward direction.

Release nut (4) and remove cable.