52 24 000 Removing and installing/replacing left or right rear seat

WARNING: This page is about a different car, the 2010 BMW M3, 2009 BMW M3, and 2008 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.

Unclip left or right rear seat towards top.

Raise rear seat approx. 30 cm and remove towards front.

Installation:

Feed seat belt buckles (1) into openings in rear seat.

Fig 1: Identifying Seat Belt Buckles

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert pin on rear seat (1) correctly into opening in rest side section (2).

Pin must not be damaged.

Fig 2: Identifying Rear Seat And Side Section

Courtesy of BMW OF NORTH AMERICA, INC.