Pressure converter, cylinders 5-8
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect plug connection (1) on pressure converter.
Installation:
Plug connection (1) must snap audibly into place!
Disconnect black vacuum hose at connection (VAC = vacuum reservoir).
Disconnect black/blue vacuum hose at connection (OUT=turbocharger vacuum unit).
Unscrew nuts (2).
Tightening torque 11 65 8AZ, see SUPERCHARGER
Remove pressure converter.
Check activation via BMW diagnosis system.