11 65 712 Removing and installing/replacing electric changeover valve on exhaust turbocharger, left (N63)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove left turbocharger .

Release screws (1).

Remove electric changeover valve.

Installation:

Replace O-ring.

Fig 1: Identifying Electric Changeover Valve Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Follow diagnosis instruction.

Complete vehicle
Drive
Engine electrics
Air supply
Boost pressure control