11 33 054 Removing and installing/replacing rocker arms on right side (N63)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 11 4 480
See ENGINE - SPECIAL TOOLS (N54, N63) .
(cylinder bank 1 to 4)
Necessary preliminary tasks:
- Remove inlet and exhaust adjustment unit on right side.
- Remove right inlet camshaft .
- Remove right exhaust camshaft .
IMPORTANT:
Used rocker arms (1) may only be reused in the same position.
Tolerance classes are not required.
Remove rocker arm (1) and set down in neat order in special tool 11 4 480.
Install rocker arm (1).
Align all rocker arms (1) straight.
Assemble engine.