LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2231 (Engine - Repair (N63)) >> Intake Manifold >> 11 61 730 Check BMW diagnosis system for excess pressure and vacuum (N63) >> Vacuum pressure measurement

Vacuum pressure measurement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Prepare diagnosis tester on vacuum diagnosis unit.

  1. Screw in pressure sensor.
  2. Connect stimuli cables (2) to positive and negative.
  3. Connect 12V battery cables (3) to vehicle battery positive and negative.
  4. Controller for vacuum connection.
  5. Vacuum connection (Red).
    Fig 1: Measuring Vacuum Pressure
    G06888831Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals