LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2231 (Engine - Repair (N63)) >> Intake Manifold >> 11 61 730 Check BMW diagnosis system for excess pressure and vacuum (N63) >> Calibration for vacuum pressure measurement

Calibration for vacuum pressure measurement

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2014 BMW X6, 2013 BMW X6, 2012 BMW X6, 2011 BMW X6, and 2010 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

Seal shutoff tap (2) in direction of arrow.

Release lock nut on controller (1).

Carry out pressure adjustment in accordance with BMW diagnosis instruction.

Secure controller (1) hand-tight against turning.

Open shutoff tap (2) again.

Fig 1: Releasing Lock Nut On Controller
G06888832Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals