LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2221 (Body Equipment - Repair (E88)) >> Floor/Luggage/Engine Compartment Panel >> 51 47 491 Removing And Installing/Replacing Rear Underbody Protection >> Two-Part Underbody Protection

Two-Part Underbody Protection

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1).

Detach underbody protection (2) from bracket (3) and remove.

Installation: 

Ensure correct seating.

Centre underbody protection (2) and tighten down screws (1).

Fig 1: Removing Underbody Protection
G04726249Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals