51 47 065 Removing And Installing/Replacing Finishing Strip At Front Left Or Right Entrance
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools Required
IMPORTANT:
Risk of damage!
Do not raise finishing strip (2) over entire length simultaneously.
Unclip clips (1) for finishing strip (2) with special tool 00 9 317 .
Remove finishing strip (2).
Installation:
If necessary, replace faulty clips (1).