17 11 063 Removing and installing/replacing both radiator brackets (N54, N52, N52K, N51, N53)
WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove condenser . See 64 53 551 REMOVING AND INSTALLING OR REPLACING CONDENSER FOR A/C SYSTEM .
- Remove cooling loop for power steering .
NOTE:
Texts refer to and illustrations show the left side. The procedure is identical for the right side.
Release bolt.
Tightening torque 17 11 1AZ, see ENGINE RADIATOR .
Remove holder (1).