23 2 260 Installation Drift

WARNING: This page is about a different car, the 2010 BMW 135i, 2009 BMW 135i, and 2008 BMW 135i. However, it is still accessible from the selected car via links, so may be relevant.

Minimum set: Mechanical tools

Fig 1: Identifying Installation Drift (23 2 260)

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: For fitting rotary shaft seal on selector shaft of rear section of transmission casing

Transmission: S5D 310Z

Storage location: A20

SI number: 1 07 90(244)

Order number: 23 2 260

Installation drift