00 0 220 Special tool cabinet, length 2 m

WARNING: This page is about a different car, the 2010 BMW 128i, 2009 BMW 128i, and 2008 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Dimensions: (LxHxD) 2.05 m x 2.10 m x 0.65 m For extended accommodation of special tools. IMPORTANT! Use Order No. 00 1 000 to erect a complete 6 m long special tool cabinet.

SI number: 0 01 00 (549)

Order number: 00 0 220

Special tool cabinet, length 2 m

Consisting of:

Fig 1: Identifying 00 0 220 Special Tool Cabinet, Length 2 M

Courtesy of BMW OF NORTH AMERICA, INC.

1 = 00 0 221 Frame with roller shutter

NOTE: Basic frame for erecting a separate 2 m long special tool cabinet. NOTE: If ordered individually as a mounting frame, the complete scope of delivery must already be present under Order No. 00 0 220. Overall length with a mounting frame: 4 m

In conjunction with: 00 0 225 / Not available without roller shutter for stability reasons!

2 = 00 0 222 Side panel, left

NOTE: Required only once for erecting the basic frame

3 = 00 0 223 Side panel, right

NOTE: Required only once for erecting the basic frame

4 = 00 0 224 Large special tool board 2 m x 1 m

NOTE: This special tool board serves as the rear panel of basic and mounting frames and is the basis for large stationary and moving special tool boards.

In conjunction with: Hook set and films

5 = 00 0 225 Roller shutter, lockable

NOTE: Included in scope of delivery 00 0 221. This order number is for reordering purposes only.

6 = 00 0 226 Side frame

NOTE: Required only once for setting up the basic frame