51 21 225 Removing And Installing Or Replacing Inside Door Opener In Left Or Right Front Door

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove door trim panel

Unhook Bowden cable for release lever:

Lever out lock (2) upwards
Detach Bowden cable (3) towards rear/top.

Installation:

For fitting, press release lever (1) fully onto door trim panel.

Fig 1: Pressing Release Lever Onto Door Trim Panel

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Release catches (2) and remove door opener (3).

Fig 2: Identifying Catches & Door Opener

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Catches (1) on door opener (2) must not be damaged.

Fig 3: Identifying Catches On Door Opener

Courtesy of BMW OF NORTH AMERICA, INC.