34 11 250 Removing and installing / replacing a brake carrier / brake guard plate at front
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove front brake disks
Release screws (1) and remove brake guard plate (2).
Installation:
Tightening torque, see 34 11 FRONT BRAKE .