17 11 063 Removing and installing/replacing both radiator brackets (N54, N52, N52K, N51, N53)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 128i, and 2009 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove condenser . See 64 53 551 REMOVING AND INSTALLING OR REPLACING CONDENSER FOR A/C SYSTEM .
Remove cooling loop for power steering

NOTE: Texts refer to and illustrations show the left side. The procedure is identical for the right side.

Release bolt.

Tightening torque, see 17 11 1AZ in ENGINE RADIATOR .

Fig 1: Locating Bolt

Courtesy of BMW OF NORTH AMERICA, INC.

Remove holder (1).

Fig 2: Removing Holder

Courtesy of BMW OF NORTH AMERICA, INC.